The stationary screw (auger) compactor mod. SPV is particularly suggested for extremely bulky materials such as great packages, cardboards and pallets.

The screw compaction system allows a high compression ratio and also grind down materials before compaction and storage inside the container.

In addition, the screw compactor guarantee a lower noise while operating thanks to the exclusively electrical functioning.

Noise level while compacting is lower than 70 dBA.

The press unit (screw model), built in durable material (Hardox), is able to exert a pushing power of 70 tons.

The electrical functioning is allowed by a 4 poles asynchronous electric engine (from 11 Kw to 15 KW), coupled with a gear motor for the screw functioning.


The digital control panel includes: key clutch, emergency button, arrangement for remote control, industrial type power plug with norm-compliant cable (6 mt), automatic phase switch and remote control connector.

Electrical system and panel are furnished in compliance with latest safety standards and CEI norm with IP55.

 

There are two selectable cycles: manual (push forward and pull back) or automatic (single or by timing device).

Designing and assembling our compactors, we took in account active and passive safety for the operator, according to latest UNI EN and prEN norms in this domain.

Components have been reduced in numbers, unifying elements when possible such as: electrical system features, screws and mechanical features.

 

A wide hopper bolted to the top is furnished with different requested capacities.

The compactor is coupled with a roll on/off container with cubic capacity from 30 to 40 m³ depending on request.

Painting in requested colour after washing, pickling and a double layer rust-inhibitor.


We complete our furnish with declaration of conformity with EC regulations, technical features and user manual.