ITA
ENG
The Stationary Standard Compactor Mod. SP is built with steel bottom and is boltable on the floor through steel plates.
The steel compacting blade is moved by a cylinder with suitable bore and stroke; this press device is supported by graphite bottom placed sliding blocks; other sliding blocks are placed on side guides. A wide bolt-on hopper is furnished in requested capacity.
The coupling with mobile roll on/off containers mod SCP is allowed by mechanical hooks.
The electro-hydraulic (double or teiple pump) functioning is allowed by a 380V 4 poles asynchronous electric engine. The hydraulic-circuit maximum pressure is 200 bar, while maximum performance pressure is 180 bar.
There are two selectable cycles: manual (push forward and pull back) or automatic (single or by timing device). The control panel presents in addition: key clutch, emergency button, arrangement for remote control, industrial type power plug with norm-compliant cable (6 mt).
Electrical system and digital control panel are furnished in compliance with latest safety standards and CEI norm with IP55.
Designing and assembling our compactors, we took in account active and passive safety for the operator, according to latest UNI EN and prEN norms in this domain.
Components have been reduced in numbers, unifying elements when possible such as: flexible pipes, electrical system features, screws and butt-welded fittings.
Choosing our suppliers we opted for those with a international distribution network, referring in particular to: electric engines, hydraulic pumps, butt-welded fittings and electrical accessories.
Painting in requested colour after washing, pickling and a double layer rust-inhibitor.
We complete our furnish with declaration of conformity with EC regulations, technical features and user manual.