The cubic capacity of Roll on/off Standard compactors (mod. SC / SCL) mayvary according to requested lengths from 3 m³ to 24 m³ .

The truncated cone bin is realized with rounded off corners to facilitate materials discharge (by dumping), while press-formed reinforced covering guarantee a fitting time resistance. Side opening backdoor (in standard model) is equipped with a gasket.

The press unit, built in durable material, glides on self-lubricating guide rails and is able to exert a pushing power of 36 tons. Loading hopper dimensions are ≈ 2000 x 2000 mm.

Other compactor’s structural elements are:

  • front and back sliding rollers;
  • Supplementary rear lifting hook for ground displacements;
  • toothed waving stirrup inside the tank to keep waste in place while compacting.

The standard supply includes:

  • external pressure gauge for performance’s pressure control;
  • correct functioning tester for checking signals of the dashboard;
  • remote control connection.

The electro-hydraulic functioning is allowed by a 4 poles asynchronous electric engine (220/380 V – 7,5 KW = 10 HP at 1450 rpm). The hydraulic-circuit maximum pressure is 200 bar, while maximum performance pressure is 180 bar. A complete machine cycle takes 28 secs, and the potential volume compacted per cycle is 1.14 m³. There are two selectable cycles: manual (push forward and pull back) or automatic (single or by timing device).

The control panel present in addition: key clutch, emergency button, arrangement for remote control, industrial type power plug with norm-compliant cable (6 mt). Electrical system and panel are furnished in compliance with latest safety standards and CEI norm with IP55.

Designing and assembling our compactors, we took in account active and passive safety for the operator, according to latest UNI EN and prEN norms in this domain. Components have been reduced in numbers, unifying elements when possible such as: flexible pipes, electrical system features, screws and butt-welded fittings.

Choosing our suppliers we opted for those with a international distribution network, referring in particular to: electric engines, hydraulic pumps, butt-welded fittings and electrical accessories.

Painting in requested colour after washing, pickling and a double layer rust-inhibitor.

Standard supply may change according to a series of options:

  • power-supply with 5.5 KW, 7.5 KW or 11 KW electrical engine;
  • power-supply with independent mono or bi-cylinder diesel engine;
  • horizontally pivoted hydraulic back-door;
  • sliding charging hopper’s cover;
  • lower lever loading plan;
  • fixed or mobile bin-lifter system;
  • Gsm data transmission (machine allarm, system state, burglar allarm);
  • Automatic compacting system without human action, inclusive of electric eyes radars installed on the compactor entry chamber to detect fullness of the chamber and automatic compacting process and visual allarm during funcion;
  • other by request.

From the same series, we also produce Mini Roll on/off Compactors mod. SCL with cubic capacity from 3 m³ to 10 m³, adapted to be transported by vehicles such as FIAT DAILY or similar models.

We complete our furnish with declaration of conformity with EC regulations, technical features and user manual.